Product Description:
This series of products are reliable sealing performance, maintenance-free for 20 years, switch torque light,can be installed in heat transfer stations, district heating pipe network, branch pipes, heat exchanger unit, heat transfer equipment or ancillary equipment connected to other.use for cut off . The main use of the urban heat, city gas, city water supply and drainage lines.
Standard type:
Full bore type:
No. |
Part name |
Material |
1 |
Body |
Carbon steel St37.8 |
2 |
Neck |
PTFE+SPCB |
3 |
Ball |
304 stainless steel |
4 |
Stem |
2Cr13 |
5 |
Seat |
25%C+PTFE |
6 |
Metal washer |
60Si2Mn |
7 |
Spring |
60Si2Mn |
8 |
"O" Ring |
FPM |
9 |
End piece |
Carbon steel St37.8 |
10 |
Handle |
Carbon steel +HCr |
11 |
"O" Ring |
FPM |
12 |
Gland |
304 stainless steel |
Five Advantages:
1. integral seamless steel tube pressed full-auto welded without leaking outward.
2. PTFE+25% carbon fiber and disc spring feely compensating structure zero leakage.
3. can be directly buried without need of a high ground well,saving the engineering cost.
4. both valve and pipeling are made of the same material, without the condition of uneven sterss.
5. in multiple connection combination, for use with special working conditions.
Full bore type:
CERTIFICATION: ISO, TS, API, CU-TR, CE....etc
We pay much attention in Test process:
(1) Shell Hydrostatic Test
ANSI B 16.34 Section 7.1 | ||
Valve Size NPS |
Test pressure |
Test Time. Sce |
Below DN50 |
1:5 times the 100F |
15 Sce |
DN65~DN200 |
Rating of ANSI Class |
60 Sce |
Up DN250 |
Max. Operating Pressure |
180 Sce |
Test pressure should be above 1.5 times than the valve's Max work pressure (100F) |
(2) Seal Hydrostatic Test
The pressure should be more 1.1 times than working pressure by seal hydrastatic test
ANSI B 16.34 Section 7.2 | ||
Valve Size NPS |
Test pressure |
Test Time. Sce |
below DN50 |
1:1 times the 100F |
15 Sce |
DN65~DN200 |
Rating of ANSI Class |
30 Sce |
above DN250 |
Max. Operating Pressure |
60 Sce |
Test pressure should be more 1.5 times than the valve's Max work pressure (100F) |
180Sce |
(3) Seal Air Test
Seal air leakage test is based on 80PSIG(6kgf/cm2) inert-gas or the air reach the test pressure, then close the valve. after that check the valve whether it is leakage or not.
Packaging & Shipping:
Our Services:
1.100% factory price, saving cost for client by reducing intermediate link.
2.Strict quality control system and amounts of testing equipments.
3.Deal with client's any problem at fist time. Market, technical support and after-sale service within 24 hours.
4.Garuantee quality of the valves and dilivery period
5.Certification: CE, ISO9001, TS, CU-TR, API...etc.
6.Low MOQ: Our factory owns the casting company by itself. We are always ready for providing the sample and producing some small orders, in order to meet the business well.
7.OEM Accepted: We can make the products with the client's demand standard or the customer requirement.
8.You can order your own configuration.
A:manual B: electric C: pneumatic D: bare shaftE: disc with pin F: disc without pin G: double half shaft H: one piece body I: two pieces body J: logo
Company Information:
FAQ
1.What is the MOQ?
According to company regulations 10 sets, 5 sets is also acceptable for intentional customer.
2.What about your payment terms?
30% payment in advance, 70% balance pay T/T before loading.
3.What is your delivery date?
10-30 days after received the advance payment.
4.Which models sell best in your factory?
Q61C-25; Q361FC-16; Q661FC-25; Q961C-25(DN15-DN1400)
5.What kind of certification you have?
CE; ISO9001; EAC; API; TS...
6.How many people in your factory? How many designer and how many QC people?
More than 200 employees, 8 engineers, 55 QC people, 20 years experience.
If you're looking for the actuator fully welded ball valve, welcome to buy the quality products at a discount with us. As one of the leading valve manufacturers and suppliers, we will offer you good after-sale service and fast delivery.