Specifications
5 Port 10G Switch product mode: FS-1005G10
FS-1005G10 is an Unmanaged 10G 5 ports switch, it can expand your network’s bandwidth and reduce traffic bottlenecks. These 2.5G switches come equipped with 10GBASE-T RJ45 ports that provide higher gigabit speeds capable of up to 10Gbps over your existing Cat5e or better cabling. Each high-speed 10G switch can be mounted to the wall for setup flexibility.
The fanless design lowers energy consumption and eliminates distracting operating noise. The FS-1005G10 switches are cost-effective solutions to increase your network’s throughput.
Standards |
IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3z IEEE802.3ab IEEE802.3bz |
Device Interface |
4 x 10GBASE-T ports (10Mbps/100Mbps/1Gbps/2.5Gbps/5.0Gbps/10Gbps) 1 x 10GBASE-T ports (10Mbps/100Mbps/1Gbps/2.5Gbps/5.0Gbps/10Gbps) LED indicators |
Data Transfer Rate |
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) 2.5 Gigabit: 5Gbps (full duplex) 5G Gigabit: 10Gbps (full duplex) 10G Gigabit: 20Gbps (full duplex) |
Performance |
Data RAM Buffer: 1.5MB Switch Capacity: 25Gbps MAC Address Table: 16K entries Forwarding rate: 18.6Mbps (64-byte packet size) Jumbo Frame: 12KB |
Special Features |
Wall-Mountable Fanless |
Power |
Input: 100-240V AC, 50/60Hz Output: DC 12V/1A |
MTBF |
830000 hours |
Operating Temperature |
0℃-40℃ (32℉-104℉) |
Operating Humidity |
Max 90% non-condensing |
Dimensions |
154x112x31mm |
Weight |
0.24kg |
Warranty |
2 year |
Package contents |
FS-1005G10 Quick Installation Guide |
Others |
FAQ
Q: Is the FS-1005G5 switch fully 10 gigabit?
A: Yes
Q: What is the network cable requirement of the switch?
A: You are advised to use network cables of CAT6A or higher specifications. Otherwise, the transmission distance may be affected.
Q: Does this switch have high heat?
A: After all, it is ten gigabytes of efficient transmission, will heat, but not high heat.
Q: What if the in-use rate does not reach 10 gigabit?
A: To ensure reliable 10-gigabit transmission, we strongly recommend users to use network cables above CAT6A. Because only the network cable above CAT6A can guarantee the transmission bandwidth of 10-gigabit.
http://www.fujanet.com/